Two -dimensional workbench PLC control training table

 

This device is the micro -shrinking of the actual flat two -dimensional motion system. It is controlled by a programmable controller. In the direction of the X and Y axis, it accurately drives the stepping motor to perform the finished product control. All the action processes in the system.

 

Technical Parameters

 

Power: single phase AC220V, 50Hz

Power: <200W

Size: not less than 600*400*500mm

 

Equipment structure:

 

The cross -sliding control tr--ning model is a metal structure, and the connection terminals of each commonly used module are connected to the safe socket, and the circuit is connected to the circuit with a wire with a safe plug; connect. The combination of the plug -in connection circuit with the terminal connection circuit not only ensures the tr--ning, formation and consolidation of the basic skills of students, but also to ensure the rapid, safe and reliable circuit connection.

3. Equipment characteristics:

1. Manual/automatic control mode, for hardware detection and programming.

2. Open execution agencies can be programmed according to different control schemes to form different execution systems, and adapt to personnel at different levels to learn and program. It can also be used as a subject design or research.

3. The product is open, and the overall mechanical structure is clearly visible.

Purpose:

The dynamic blasts of the fan are static and adjustable [installation angle 15, 20, and 25 degrees]. The m--n axis uses a dual -stage gear motor to test the performance parameters of the wind chamber of the axis streaming fan.

M--n configuration:

Double -level transmission motor, torque torque gravity sensor, rectification grid, testing duct, adjustable --r gate, stubborn test, flow test differential pressure sensor, static pressure test differential pressure sensor, speed measurement device, ** signal input inspection instrument display flow of traffic , Gravity, temperature, differential pressure, st--nless steel brackets and power distribution boxes.

Technical Parameters:

1. Input power supply: three -phase AC380V ± 10% 50Hz, power 1.5kW.

2. Bear -flow -type centrifugal fan parameters: use a dual -stage transmission motor, the --r volume is 2000 m3/h, the wind pressure is 1000 PA, and the power is 1.5kW.

3. Blittering flow meter with oblique tube micro pressure meter metering speed: the range -10-700Pa.

4. Merimpage torque gravity sensor device, wheel spoke weight sensor: 0-20kg.

5. The experimental --r duct is made of 304 st--nless steel, which is divided into --rport sections, experimental sections, test sections, etc., and the flanges nut is connected to each other to facilitate disassembly.

6. The temperature is measured by the high -precision temperature sensor. The ** signal input the inspection instrument with the high -precision digital display table. The display of the experiments such as the temperature, resistance, flow velocity, power, speed, and torque is all measured, and the manual wind door adjusts the --r volume.

7. Dimensions: 3500 × 500 × 1200mm. The shape is st--nless steel moveable bracket with a double brake wheel.