Electric Gourd Electric Training Device

 

"Electric Gourd Electrical Skills Tr--ning Device (Half -Audin)" is further improved and improved on the basis of the original "electric gourd electrical skills tr--ning assessment device". The electrical part of the machine tool is connected to the physical model of the machine tool, showing all the motion of the machine tool, which is more real and intuitive. This device is suitable for tr--ning and assessment of the electrical parts of the machine tools in the initial, middle, and ** skill appr--sal of the m--ntenance of electricians.

 

2. Product characteristics

 

1. CD1 electric gourd semi -solid simulation model is designed with reference to the actual CD1 electric gourd function, and reduced according to a cert--n size ratio;

 

2. The operation of this set of electrical parts can realize the various sports of the CD1 electric gourd, which includes: the hook lifting and the translation of the gourd device.

 

3. All the contacts of the machine tool Electric have a corresponding test point on the panel of the device to facilitate students to detect and judge. At the same time, a fault exclusion switch is also set under the panel;

 

4. The voltage level of the motor used on the semi -physical model is exactly the same as the actual machine tool;

 

5. Through the fault setting, students can truly understand the connection between the fault point and the actual lathe, so that students can master the practical ability of the actual electrical line m--ntenance.

 

Third, tr--ning project

 

1. Familiar with commonly used low -voltage appliances, principles, principles

 

2. Circuit circuit analysis

 

3. By observing the motion of the model, understand the actual movement

 

4. Find out the fault points in the line by measuring

 

5. Set the fault point as a skill assessment device for m--ntenance electricians

 

Fourth, fault setting

 

1. The hook starts f--ls.

 

2. In addition to the hooks, other controls are invalid.

 

3. Hook rising control f--ls.

 

4. Hook decrease control.

 

5. The translation mechanism controls the f--lure.

 

No less than 12 faults can be set.

1. Principles, uses and characteristics:

The whirlwind dust collector uses the flow speed of the dust -cont--ning gas to make the --r flow move in a cert--n direction in the dust removal device in a cert--n direction. The particles obt--n centrifugal force in the rotation of the --rflow, causing the particles to be separated from the --rflow. The whirlwind dust collector has the advantages of simple structure, low cost, and convenient equipment m--ntenance and rep--r, and can be used for purification of dust -cont--ning smoke, and it can also be recovered with valuable dust. This experimental system is m--nly used to demonstrate the principle of the whirlwind dust removal process.

2. M--n technical parameters and indicators:

1. Wee volume: 300 ~ 700m3/h;

2. Entry gas dust concentration: <50g/ m3

3. Dustering efficiency: 70%~ 80%;

4. Pressure drop: <2000Pa;

5. Device shape size: 1800mm wide 450mm height 1600mm,

6. Work power: AC220V ± 10%, 50Hz, single -phase three -line system, power of 1500W; safety protection: ground protection, leakage protection, overcurrent protection;

7. Installation of power lines and control lines: It is necessary to use environmentally friendly flame retardant electrical wiring grooves to standardize and organize the characteristics of national standards. It has the characteristics of insulation. The wiring is neat and reliable.

3. M--n configuration:

1. 1 set of whirlwind dust collectors, transparent organic glass materials, 8mm wall thickness, and device with unloading dust removal;

2. One set of organic glass dust automatic feeding devices: vertical feed;

3. 1 set of dust static mixer: use box static mixer;

4. 1 U -shaped pressure meter, 2 groups of manual monitoring of import and export, 2 groups of pressure rings, and 1 batch of transparent pressure measuring hoses;

5. 1 centrifugal ventilation: power supply voltage: 220V, power 1.1kW, speed 2900R/min;

6. 1 set of inverter: control the wind turbine torque adjustment of the --r volume;

7. Power control system: 1 double -sided sub -light densely pattern plastic control box, leakage protector (Delixi brand), self -lock button switch with lights,

8. 接 110 connect pipe road and control ball valve