ZOPXNYCDZ-06 charging pile equipment assembly and debug training device

Charging pile equipment assembly and commissioning training device, charging pile disassembly training platform real -time detection of voltage, duty, frequency, frequency. The maximum output current of the charging pile is calculated through the duty occupation ratio.

Technical parameters:
1. Using 250V/440V 32A (three-phase) gun holder, compatible with single and three-phase AC charging pile testing.
2. The power supply method can choose external power supply or pile power supply.
3. Detect the voltage, duty cycle and frequency on the CP line of the charging pile in real time. And calculate the maximum output current of the charging pile according to the national standard through the duty cycle.
4. Detect the CC terminal connection resistance value on the charging pile in real time, and determine the connection status and cable capacity according to the national standard.
5. Built-in single-phase electricity meter, which displays the charging voltage and current data of the charging pile in real time.
6. Monitor the temperature of the charging gun holder in real time.
7. The S2 switch is external and controlled manually.
8. Use 7-inch resistive touch screen operation.
9. Judge the qualified range of CP voltage, CP frequency, CP duty cycle and CC resistance data and display the judgment results.
10. All the 7-hole wires of the AC gun base are led out with banana holders to facilitate measurement by external instruments. Among them, A, B, C and N use 16MM sockets with a voltage resistance of 3KV and a maximum current of 80A.
11. The total weight is less than 6KG, making it easy to carry when going out.
12. Meet the national standard interoperability test.
13. Equipped with multi-level leakage resistor.