ZOPGC-13 loader automatic transmission disassembly training platform

The loader automatic transmission is disassembled and installed, and the construction machinery automatic transmission disassembly training device uses the ZC30 automatic transmission assembly (complete accessories, easy to disassemble), and install it on a dedicated flipper.

1. Function introduction

1. Use ZC30 automatic transmission assembly (complete accessories, easy to disassemble and assemble), and installed on a special flip frame.
Using a deceleration flip mechanism , the transmission can be rotated at any angle and locked at any position, making it easy for students to disassemble and assemble from different angles.
2. Place an oil pan at the bottom to facilitate centralized storage of small parts or screws.
3. The flip frame is welded with high-strength steel structure, and the surface is spray-coated. The bottom of the flip stand is equipped with self-locking casters, which is removable and convenient for teaching.
2. Technical Specifications
Equipment appearance: 1200×600×1100mm (length×width×height)
Color: 7032
Steel pipe: 40*40*3mm
swivel casters
The front two swivel casters with locking function
2 The rear two swivel
casters It is fixed with M6*4 screws to the bench to facilitate equipment rep*r and m*ntenance.
Caster: 200mm×100mm (diameter×width)
Caster support: 2.0T
Reducer: MOPA70; 1:70
2. Basic configuration (each unit)

serial number	Name	Specifications and models	unit	quantity
1	ZC30 automatic transmission assembly	Complete accessories, easy to disassemble and assemble	set	1
2	Disassembly and assembly of flip frame (with self-locking caster device), steel pipe with column 2002005mm;	1200×680×850mm (length×width×height), with reducer, capable of turning and stationary at any angle in the axial direction.	tower	1
3	Large area oil basin	660×590×35mm (length×width×depth)	indivual	1
4	Reduction mechanism (with accessories such as rocker plate)		set	1