Board filtering constant training device

1. The entire device is beautiful and generous, the structure is reasonable, the overall sense is strong, and has a strong engineering atmosphere, which can fully reflect the concept of modern laboratories.

2. The equipment is a self -propelled frame structure, and the feet are installed to facilitate the disassembly m--ntenance and handling of the system.

3. Except for special materials, the entire equipment is made of industrial 304 st--nless steel. All equipment is finely polished, which reflects the perfectness of the entire device.

4. This experimental device is a small industrial st--nless steel plate filter consisting of a filter plate and filter box, which can completely reflect the structure and operation process of the board frame filter machine. The --r is injected into the filter, and the concept of engineering is strong.

5. Filter plates adopt a flat thread -like mesh, advanced structure, easy to clean, and can effectively extend the service life of various filter membranes.

6. All sealing parts of the product are sealing ring with silicone rubber or fluorine rubber (acid -resistant alkali and alkali). High temperature resistance, corrosion resistance, non -toxic, leakless leakage, the equipment adopts a mechanical compression method, and the sealing performance is good.

7. Device design can be observed at 360 degrees to achieve comprehensive teaching and experiments.

6. The entire system adopts a standard industrial instrument control system, which can perform chemical principles experiments. It is also a good platform for process automation and chemical testing instrument experiments.

Device function

Understand the structure, sequence and operation of the plate frame filter can be washed;

2. Measure the constant voltage filtration constant and ratio of constant pressure under cert--n conditions;

3. Measure the compression index of filter cake under different pressure;

4. Learn the measurement method and operation method and operation;

5. The flow state of the experimental medium in the pipeline is clearly visible throughout the process

6. Integrated control, high -stable data transmission, hardware encryption.

The technical specifications and configuration det--ls are as follows:

1. The drawing table consists of a drawing board and a computer display to adjust the stand and desktop. The specifications (82cm*98cm), the desktop height is 80cm, and there is a flat screw under the table at the foot of the desk, which can be adjusted according to the ground.

2. There is a standard configuration and several optional configuration composition of the drawing table. The standard configuration includes: drawing board, drawing desktop and other drawing appliances. Options include: right -side auxiliary table version, left file bucket, display rocker arms component, keyboard drawer, cockpit, display box, etc.

3. Drawing board characteristics and use:

(1) Aluminum alloy guide r--l and self -lubricating quiet pulley set; flexible sliding and comfortable feel.

(2) Locking component: Located on the left side of the map board, there is a knob control, which is loosened clockwise, otherwise locking.

(4) Drawing board surface is connected to the adjustment bracket. When used, you can adjust the tilt angle as needed.

(7) There is a pen groove in the lower part of the map to temporarily place stationery.

4. Desk frame: The desktop is galvanized iron tube, which is made of welding, polishing, and plastic. It is firm and beautiful, durable. Height 800mm.

Occupational skills comprehensive integration tr--ning virtual simulation system:

The software in the software can be rotated, magnified, reduced, and translated at 360 °. There are general interactive buttons: return, homepage, help. All virtual simulation tasks are prompted, and the software automatically hooks after a task. There is an experimental task above the tool library

1. Basic three -dimensional (XYZ space coordinate icon is automatically rotated at the XYZ space coordinate icon.)

A. Graphic stereo: The experimental steps are divided into experimental tasks (text prompt tasks) -the construction model (the model in the drag and dragging tool library to the three -projection surface system, and automatically appear the projection, there is a prompt when choosing an error) - change the attitude (by passing the passage) Click on the up, down, left and right arrows) — Select the projection (enter the answer interface, select the 3D projection map completed at this time in 6 items)