ZOPGC-19 diesel engine training device

Diesel engine training table, construction machinery diesel engine training device is based on refurbishment of construction machinery/Changchang 480 (plunger pump) diesel engine. It can run the engine to perform practical operations of starting, acceleration, deceleration and other operating conditions. The structure and work process of diesel engines.

1. Product Introduction
This equipment is based on the refurbished engineering machinery /Changch* 480 (piston pump) diesel engine. It can run the engine and perform practical operations on starting, acceleration, deceleration and other working conditions, truly demonstrating the composition and structure of ordinary diesel engines. work process.
2. Functional features
1. A real and operational ordinary diesel engine, fully demonstrating the structure and working process of an ordinary diesel engine.
2. The tr*ning table panel is made of 4mm thick high-grade aluminum-plastic panels that are corrosion-resistant, impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer using a special process; the panel is printed with color circuit diagrams that will never fade; students can intuitively Compare the circuit diagram and the actual diesel engine to understand and analyze the working principle of the control system.
3. Instruments are installed on the panel of the tr*ning platform, which can display changes in parameters such as engine speed, water temperature, oil pressure light, and charging indicator light in real time. 4. There are detection terminals installed on the panel of the tr*ning platform, which can directly detect the electrical signals of each relay, solenoid valve, sensor
and other pins on the panel , such as resistance, voltage, current, signal, etc. 5. The tr*ning platform is equipped with a throttle control device to facilitate acceleration and deceleration of the engine. 6. The tr*ning platform is equipped with installation protection devices such as a m*n power switch, a water tank protective cover, and a flywheel protective cover. 7. The base of the tr*ning platform is welded with a steel structure, and the surface is spray-p*nted. It is equipped with a self-locking caster device, which makes it flexible to move, safe, reliable, sturdy and durable. 3. Technical specifications Overall dimensions: 1500×1000×1700mm (length×width×height) Working power supply: DC 12V Fuel label: According to engine model Fuel tank volume: 10L Working temperature: -40℃～+50℃ Color: 7032 Steel pipe: 40 *40*3mm panel cabinet: 1.5mm cold plate stamping, with m*ntenance door on the back; mobile casters: 120*80mm 4. Basic configuration (each unit)

serial number	Name	Specifications and models	unit	quantity
1	Test control panel	Equipped with various detection terminals and color circuit diagram (9509004mm aluminum-plastic plate)	set	1
2	instrument cluster	Original car	set	1
3	Ignition Switch	Original car	indivual	1
4	Ordinary diesel engine assembly	Original car	set	1
5	Fuel tank	10L	indivual	1
6	Throttle control		set	1
7	Intake and exhaust pipes (with protective cover)	Original car	set	1
8	Water tank (including st*nless steel protective cover)		set	1
9	battery	12V 80Ah	tower	1
10	relay	Including: starting relay, preheating relay, etc.	set	1
11	Fuse box		indivual	1
12	m*n power switch	50A	indivual	1
13	Mobile stand (with self-locking casters)	1500×1000×1700mm (length×width×height)	tower	1
14	Fault simulation and troubleshooting device		set	1
15	Equipment Teacher's Manual		set	1
16	Equipment certificate, warranty card		set	1