ZOPCLG-GC "Glimage Cooperation" shows the training device

"Tolerance Cooperation" demonstrates the display cabinet. The tolerance and display cabinet are an important part of the static and dynamic geometric accuracy of mechanical products. The geometric accuracy of mechanical products has also made increasing requirements. The geometric accuracy has formed a door. Independent technical discipline.

I. Overview:

" Tolerance fit" display cabinet is an important technical requirement in the design drawings of mechanical parts and an important component of the static and dynamic geometric accuracy of mechanical products. With the development of science and technology and the improvement of production level, higher and higher requirements have been put forward for the geometric accuracy of mechanical products. Geometric accuracy has formed an independent technical discipline and has been favored by knowledgeable people in academia and engineering technology circles. People attach great importance to it.

2. Technical specifications:

1. This display cabinet is composed of six single display cabinets. The overall dimensions of the display cabinet are: 1200×400×1900mm (length×width×height).

2. The cabinet is welded with SPCC cold-rolled plates, and the surface is made of medium-temperature phosphating spray. The cabinet has good rigidity. The display panel inside the cabinet is a super luxurious aluminum-plastic sandwich panel with good load-bearing capacity. The board is equipped with necessary diagrams and text descriptions, and is beautiful in appearance and durable.

3. The back of the cabinet is equipped with double doors, which is convenient for equipment m*ntenance and rep*r.

4. There is a cabinet box at the bottom of the cabinet, which is convenient for storing individual models , experimental boxes and related experimental documents.

5. The bottom of the cabinet is equipped with universal wheels for easy movement and meets ergonomic requirements.

6. The model materials are made of real objects, acrylic organic boards and engineering plastics.

3. Det*led introduction of display cabinet:

serial number and name	Contents of the model in the showcase
Cabinet 1: Use of measuring tools	Vernier caliper with depth; height vernier caliper; outer diameter micrometer; depth vernier caliper; depth micrometer; outer caliper; inner caliper; plug gauge; spirit level; thickness gauge.
Cabinet 2: Str*ght lines and flatness	Strghtness (1 in a given direction) 3 pieces; Strghtness (2 in a given direction) in one direction; Strghtness (two directions perpendicular to each other); Strghtness (in any direction) 2 pieces; Flatness 2 pieces; Flatness error identification method (1) three high points and one low point; (2) two high points and two low points; (3) two high points and one low point; Strghtness error identification method (in a given plane); Strghtness error identification method (given direction); Str*ghtness error identification method (any direction) 3 pieces;
Cabinet 3: Roundness, Cylindricity and Line Profile	2 pieces of roundness; cylindricity; 2 pieces of line contour; roundness error judgment method; least squares center; 2 pieces of minimum circumscribed circle center; 2 pieces of maximum inscribed circle center; and minimum cont*nment area of roundness;
Cabinet 4: Surface contour, parallelism and perpendicularity	Surface contour; Parallelism (1) One direction a is face to face; Parallelism (1) One direction b is face to face; Parallelism (1) One direction c is face to face; Parallelism (1) One direction d is line to line 2 pieces ; Parallelism (2) Two directions that are perpendicular to each other; Parallelism in any direction; Verticality in one direction, a, face to face; Verticality, in one direction, line b opposite to line; Verticality, in one direction, c facing line; Verticality in one direction, line d; 2 pieces for line alignment; verticality (2) two directions perpendicular to each other; verticality in any direction (opposite to the line); verticality error judgment method.
Cabinet 5: Inclination and Coaxiality	The inclination of a is face to face in a given direction; the inclination of b is face to line in a given direction; the inclination of c is line to line in a given direction 3 pieces; the inclination is line to face in any direction; the coaxiality is 3 pieces.
Cabinet 6: Symmetry, position and runout	Symmetry a face to face; symmetry b line opposite 2 pieces; symmetry face to line; symmetry line to line; position 1 point position 2 pieces; position 2 line position 2 pieces; position 2 in any 2 pieces in the direction; surface position; composite position; circular runout 1, radial circular runout 2 pieces; oblique circular runout 2 pieces.

Note: The glass on the cabinet is fragile and must be provided by the purchaser;