ZOPQG-07A2 Uncavant Experimental Device

The fitter training table (4 stations), the fitter tools equipped by the fourth -site fitter operator are generalized, standardized and dedicated, which can improve students‘ operating technology and hands -on ability. Most of the fitters are operated on the fitter platform to process the workpiece.

Our company produces benchwork laboratory equipment that is jointly developed and produced with a number of factories based on teaching requirements. The benchwork tools equipped with this product are universal, standardized and specialized, which can improve students' operating technology and hands-on ability. Most fitters use hand tools on the bench to process workpieces. Manual operation is characterized by strong technicality, and the quality of processing m*nly depends on the technical level of the operator. It has a wide range of work, has the advantages of versatility and flexibility, and is not restricted by equipment, site and other conditions. Therefore, Any occasion where it is not suitable or difficult to use mechanical processing methods is usually completed by a fitter. Especially the assembly, debugging, installation and m*ntenance of mechanical products require a fitter. Therefore, the fitter is not only the most commonly used tool in machinery manufacturing factories. It is one of the most extensive types of work, so fitter laboratory equipment is also an indispensable tr*ning and teaching product for major colleges and technical schools.

The tr*ning platform is made of iron with a double-layer matt dense spray-p*nted structure, and the material thickness is 1mm; the desktop is made of wooden material, with an overall size of 150×150×80, and a rubber pad is attached to the desktop to protect the operating surface. The overall structure is solid and the shape is beautiful. The tr*ning bench is equipped with four drawers (with locks) for placing tools and materials.

Fitter lab list (4 seats) 1 table

serial number	Name	Specification	unit	quantity
1	fitter table	150×150×80	open	1
2	bench vise	5 inch	tower	4
3	Hacksaw frame		Bundle	4
4	round file	8---12 inches	set	2
5	Half round file	8----12 inches	set	2
6	square file	8----12 inches	set	2
7	flat file	8----12 inches	set	2
8	Triangular file	8----12 inches	set	2
9	Marking tablet (for teachers only)	300×400MM	room/block	One piece for each classroom
10	Hammer		Bundle	4
11	compass		Bundle	4
12	Square		Bundle	4
13	steel ruler	150	Bundle	4
14	draw needle	Length 120	branch	4
15	Internal and external calipers		set	2
16	triangle knife		Bundle	2
17	Blade	14 inches	Bundle	4
18	Whetstone		piece	1
19	Tap	M 6 8 10 12 14	set	2
20	wrenching teeth	M 6 8 10 12 14	set	2
twenty one	chisel		set	2
twenty two	Assorted files		set	2
twenty three	hand vise		Bundle	2
twenty four	Hacksaw blade	50 items	box	2
25	adjustable wrench	200×24	Bundle	4
26	wire cutters		Bundle	4
27	One word batch		Bundle	4
28	cross batch		Bundle	4
29	Dumb wrench	8 10 14	set	2
30	Tin scissors		Bundle	2
31	Tap wrench		Bundle	4
32	wrench		Bundle	4
33	Needle nose pliers		Bundle	4
34	wire brush		Bundle	4

Can complete practical tr*ning projects

Task 1: Regular hexagon processing

1. Underline

2. Saw and file reference plane

3. Saw and file parallel surfaces

4. Saw and file the third and fourth sides

5. Saw and file the fifth and sixth sides

Task 2: File the concave and convex parts

1. Process analysis and marking

2. Processing convex bodies

3. Processing of concave bodies

4. Hole processing and tapping

Task Three (Comprehensive): Nut Processing

1. Marking - draw the processing boundary on the surface of the workpiece according to the drawing.

2. Chiseling - Chiseling the workpiece into a hexagonal body

3. Filing operation - filing the surface of the workpiece after chiseling

4. Sawing operation - saw the filed hexagonal body into four sections (length 10mm)

5.Drilling operation

6. Tapping and threading operations

Previous：No time
Next：ZOPJXMX-DC transparent hydraulic crane training device