ZOPPMX-07-stereo warehouse system control training device

The three -dimensional warehouse system control object, the Libu PLC control model is a slight shrinkage of the actual automatic warehousing system. It uses a programmable controller to control it. There are 12 cargo positions. The perfect execution agency can realize the entire action process of automatic storage systems in the modern logistics system.

Note: PLC and frequency converter can be configured separately, or used with PLC frequency conversion speed regulation tr*ning device

Overview

The physical model of the plc controlled vertical warehouse is a miniature of the actual automatic storage system. It is controlled by a programmable controller and has 12 cargo positions. It accurately drives the induction motor in the three directions of X, Y and Z axes for automatic storage or removal. The finished product and the perfect execution mechanism can realize the entire action process of the automatic storage system in the modern logistics system.

Technical Parameters

Power supply: single-phase AC220V, 50Hz
Power: <200W
Size: not less than 600*400*500mm

Features:

1. Manual/automatic control mode, for hardware detection and program verification.
2. The open actuator can be programmed according to different control schemes to form different execution systems, adapting to PLC learning and programming by personnel at different levels. It can also be used for project design or research.
3. The product is open and the overall mechanical structure is clearly visible.

Equipment structure:

The three-dimensional parking garage tr*ning model bench has a metal structure. The I/O terminals of the tr*ning and assessment device module and the connection terminals of each common module are all connected to safety sockets, and wires with safety plugs are used for circuit connections; each command switch , photoelectric switch, and indicating element circuit are connected through the terminal block. The combination of plug-in and pull-out wire connection circuits and terminal connection circuits not only ensures the tr*ning, formation and consolidation of students' basic skills, but also ensures the speed, safety and reliability of circuit connections.

CPU unit (optional):

1. Performance

(1) Input rated voltage 120~230V AC

(2) Frequency 50～60Hz

(3) Input current 50~100mA.

(4) Working memory 100kbyte

(5) Install 4 Mbyte memory. Scalable.

(6) The CPU has 14 digital source inputs (input voltage 24V), 10 relay outputs, 2 analog inputs (0 to +10 V), and 2 analog outputs (0 to 20 mA). Scalable.

(7) It has 2 PROFINET interfaces and 2 RJ45 interfaces. The maximum transmission rate of the PROFINET IO controller is 100 Mbit/s. It can connect up to 16 IO devices and supports the protocols supported by PROFINET IO, TCP/IP protocol, and MODBUS protocol.

(8) Integrated frequency measurement, control positioning, and PID regulator.

Experiment content

1. Mechanical: mechanical installation and position adjustment of the device;
2. Electrical : wiring of electrical components, selection of execution motors ;
3. Sensor : selection and application of micro photoelectric switches;
4. PLC: programming and application of PLC control driver

Hot-selling product: Electrician tr*ning bench