ZOPTDT-183B Electric Power Drag training device

1. Features:

1. The electrical control circuits are all installed on the hanging box, which is easy to operate and replace. It can expand functions or develop new tr*ning projects.

2. The operation console only needs three-phase four-wire AC power supply to be put into use. It occupies a small area, saves space and reduces infrastructure investment.

3. Equipped with voltage type leakage protector and current type leakage protector to ensure operator safety. Each power output has a soft cut-off protection function.

4. The control panel is also equipped with a timer and alarm recorder, which provides a unified standard for the assessment of students' practical tr*ning skills.

5. All components are led to the terminal blocks through wires. Students only need to wire on the terminals when wiring, which is conducive to protecting the components and routing the wires through the wire trough to be close to the industrial site.

2. Technical performance:

1. Working power supply: three-phase four-wire (or three-phase five-wire) ~ 380V ±5% 50Hz

2. Temperature: -5℃～+40℃, relative humidity <85% (25℃)

3. Device capacity: <1.0KVA

4. Overall dimensions: 1100×700×1400 (mm)

3. Equipment and equipment

(1) Power control screen

The control panel is made of iron with a double-layer matt dense pattern spray-plastic structure and an aluminum panel. It provides power and protection for practical tr*ning and assessment.

1. Three-phase four-wire power input, through the leakage protector, turn on the m*n switch, and the contactor operates through the start and stop buttons.

2. There are three 450V pointer AC voltmeters to indicate the three-phase power supply voltage at input; three indicator lights to indicate the connection between the tr*ning device and the external power supply.

3. Three-phase four-wire power output, with the function of overload or short-circuit of the single-chip microcomputer full-process monitoring device. Overload or short-circuit soft cut-off and alarm, the power supply can be started only after troubleshooting and reset.

4. Equipped with a timer and alarm recorder, which can be used as a clock at ordinary times. It has functions such as setting the tr*ning and assessment time, timing alarms, and cutting off the power supply. In addition, it can automatically record the total number of leakage alarms and short-circuit alarms caused by wiring or operation errors, providing a unified standard for the assessment of students' practical tr*ning skills.

(2) Tr*ning table: The table body is made of aluminum wood, and the tabletop is made of fireproof, waterproof, wear-resistant high-density board, with drawers and storage cabinets.

(3) Practical tr*ning components

1. DW-71 electric drag tr*ning component (1)

2. DW-72 electric drag tr*ning component (2)

3. DW-73 electric drag tr*ning component (3)

4. Three-phase asynchronous motor 380V Y/△ connection method, three-phase asynchronous motor: voltage 380V, current 0.4A, frequency 50Hz, power about 180W, with 2 centrifugal switches

4. Practical tr*ning projects

1. Knife switch forward control circuit

2. Contactor inching forward control circuit

3. Forward rotation control circuit with self-locking

4. Forward rotation control circuit with over-finding protection

5. The reverse switch controls the forward and reverse control circuit

6. Contactor interlocking forward and reverse control circuit

7. Button interlocking forward and reverse control circuit

8. Button contactor composite interlock control circuit

9. Automatic round trip control circuit

10. Contactor controlled series resistor step-down starting circuit

11. Time relay controls series resistor voltage reduction control circuit

12. Manual Y/△ reduced voltage starting

13. Contactor controls Y/△ voltage reduction starting

14. Time relay controls Y/△ step-down starting

15. QX3-13 type Y/△ automatic starting control circuit

16. Half-wave rectification energy consumption braking control circuit

17. Full-wave rectification energy consumption braking control circuit

18. C620 lathe electrical control circuit

19. Manual voltage reduction starting

20. Single-phase operation reverse braking control circuit

21. Electric hoist electrical control circuit

22. C6163 lathe electrical control circuit

23. Control circuit interlocking control circuit

24. M*n circuit interlocking control circuit